Larger Image |
X Series Shank
1/2" Sweet
Iron Single Ball Snaffle
7" Cheeks 5" Mouth
This bit is more than attractive. It is a well balanced,
medium leverage shank. The extended curb rings adds to the curb action for a
faster set and more control. This totally new design for connecting a snaffle
mouthpiece not only elimi nates the possibility of pinching a horses tongue it
totally frees the action between the left and right shank. This allows you to
train or school your horse without movement from the off side.
(REP 603) - $ 124.80
(Normally ships in 10-14 days)
|
Larger Image |
X Series Shank
1/2" Sweet
Iron Double Ball Snaffle
7" Cheeks 5" Mouth
This is a well balanced, medium leverage shank. The extended
curb rings adds to the curb action for a faster set and more control. This
totally new design for connecting a three piece snaffle mouthpiece eliminates
the possibility of pinching a horses tongue. The center section adds tongue
pressure for better headset. The ball joints totally frees the action between
the left and right shank. This allows you to train or school your horse without
movement from the off side .
(REP 604) - $ 135.40
(Normally ships in 10-14 days)
|
Larger Image |
X Series Shank
Small Sweet
Iron Chain Mouth
7" Cheeks 5 " Mouth
This bit is more than attractive. It is a well balanced,
medium leverage shank. The extended curb rings adds to the curb action for a
faster set and more control. The small chain mouth will surprise you. It is
actually very forgiving. It conforms to the mouth very well and adds some tongue
pressure for better control. This is an excellent choice if you like a heavier
feel in your hand.
(REP 605) - $ 84.80
(Normally ships in 10-14 days)
|
Larger Image |
X Series Shank
3/8" 3-Piece
Thumb Port With Roller
7" Cheeks 5" Mouth
This bit is more than attractive. It is a well balanced,
medium leverage shank. The extended curb rings adds to the curb action for a
faster set and more control. This mouthpiece has a lot going on. First when you
pull on the rein the thumb portion rotates to cue your horse. The smaller
diameter bars and the three piece action gives this mouth a lot of whoa. The
roller helps to pacify a nervous horse. 2" Thumb Port.
(REP 606) - $ 95.40
(Normally ships in 10-14 days)
|
Larger Image |
X Series Shank
5/8" Copper
Roller Correction
7" Cheeks 5" Mouth
This bit is more than attractive. It is a well balanced,
medium leverage shank. The extended curb rings adds to the curb action for a
faster set and more control. This mouth is designed to be gentle and yet keep
control. As the mouthpiece rotates it gives your horse a cue and offers some
tongue relief. The rollers roll up the bars instead of sliding. When the curb
sets the three piece action it still has good control. Port height is 1-3/4"
(REP 607) - $ 113.40
(Normally ships in 10-14 days)
|
Larger Image |
X Series Shank
3/8" Spiral
Ribbon Snaffle
7" Cheeks 5" Mouth
This bit is more than attractive. It is a well balanced,
medium leverage shank. The extended curb rings adds to the curb action for a
faster set and more control. This mouthpiece is designed for schooling a horse
to back off the bit.
(REP 608) - $ 89.20
(Normally ships in 10-14 days)
|
Larger Image |
X Series Dexter Bit
1/2"
Sweet Iron Single Ball Snaffle
8-1/2" Cheeks 5" Mouth
Made with 8-1/2" long shank for good leverage. We lowered the
mouthpiece to lengthen the purchase for faster response and to prevent the
mouthpiece from pinching the horses lip. Then finished it off with the proper
bends for good balance. This totally new design for connecting a snaffle not
only eliminates the possibility for pinching a horses tongue. It totally frees
the action between the left and right shank for easier lateral training.
(REP 803) - $ 116.40
(Normally ships in 10-14 days)
|
Larger Image |
X Series Dexter Bit
1/2"
Sweet Iron Double Ball Snaffle
8-1/2" Cheeks 5" Mouth
Made with 8-1/2" long shank for good leverage. We lowered the
mouthpiece to lengthen the purchase for faster response and to prevent the
mouthpiece from pinching the horses lip. Then finished it off with the proper
bends for good balance. This totally new design for connecting the three piece
snaffle eliminates the possibil ity for pinching a horses tongue. It totally
frees the action between the left and right shank for easier lateral training.
(REP 804) - $ 128.40
(Normally ships in 10-14 days)
|
Larger Image |
X Series Dexter Bit
Small
Sweet Iron Chain Mouth
8-1/2" Cheeks 5" Mouth
Made with 8-1/2" long shank for good leverage. We lowered the
mouthpiece to lengthen the purchase for faster response and to prevent the
mouthpiece from pinching the horses lip. Then finished it off with the proper
bends for good balance. The chain mouth is actually very forgiving. It conforms
well to the horses mouth and adds some tongue pressure for better control.
(REP 805) - $ 83.80
(Normally ships in 10-14 days)
|
Larger Image |
X Series Dexter Bit
3/8"
3-Piece Thumb Port With Roller
8-1/2" Cheeks 5" Mouth
Made with 8-1/2" long shank for good leverage. We lowered the
mouthpiece to lengthen the purchase for faster response and to prevent the
mouthpiece from pinching the horses lip. Then finished it off with the proper
bends for good balance. This mouthpiece has a lot going on . First your horse
will feel the thumb start to rotate, then the thumb and roller apply some tongue
pressure. When the curb sets the outside bars it adds a lot of whoa. 2" Thumb
Port.
(REP 806) - $ 85.60
(Normally ships in 10-14 days)
|
Larger Image |
X Series Dexter Bit
5/8"
Copper Roller Correction
8-1/2" Cheeks 5" Mouth
Made with 8-1/2" long shank for good leverage. We lowered the
mouthpiece to lengthen the purchase for faster response and to prevent the
mouthpiece from pinching the horses lip. Then finished it off with the proper
bends for good balance. As the mouthpiece rotates it gives your horse a cue.
Then offers some tongue relief. The roller bars roll up the bars instead of
sliding. But, when the curb sets the three piece action it still has good
control. Port height is 1-3/4".
(REP 807) - $ 118.60
(Normally ships in 10-14 days)
|
Larger Image |
X Series Dexter Bit
3/8"
Spiral Ribbon Snaffle
8-1/2" Cheeks 5" Mouth
Made with 8-1/2" long shank for good leverage. We lowered the
mouthpiece to lengthen the purchase for faster response and to prevent the
mouthpiece from pinching the horses lip. Then finished it off with the proper
bends for good balance. This mouthpiece is designed for schooling a horse to
back off the bit.
(REP 808) - $ 95.40
(Normally ships in 10-14 days)
|
Larger Image |
X-Series Cavalry Shank
Sweet
Iron Floating Spoon
8" Cheek 5" Mouth
Stainless steel cavalry style shanks to add better weight and
feel and looks great too. The ball design prevents pinching on the corners of
the mouth. This is a great three piece mouth with a copper roller to soften the
mouth and calm a nervous horse. The floating spade adds more leverage to the
bars for good rate and control and lays over the tongue when pressure is
applied. The port offers a little bit of palate pressure great for introducing
to a young horse that has never used a port. 1-1/2" Port Height
(REP 801) - $ 81.72
(Normally ships in 10-14 days)
|
Larger Image |
X-Series Cavalry Shank
Stainless Waterford Snaffle
8" Cheeks 5" Mouth
This is a unique combination of a shank and mouthpiece to
create an appealing new design. The shank offers good lift and lots of whoa,
while the balled mouth contacts new nerves inside and outside the horse's bars
for lots of flex and tongue pressure. It will give you a great headset and help
get the horse underneath him and his rear end down.
(REP 802) - $ 77.94
(Normally ships in 10-14 days)
|
Larger Image |
X-Series Cavalry Shank
5/8"
California Copper Roller Bars
8" Cheeks 5" Mouth
This stainless steel shank gives the tradi tional cavalry
style a bold new appeal. The heavier shank is great for horses that like to feel
the bit. When the curb strap is tightened, this shank provides good leverage.
The rotating ball design keeps the bit from pinching the corners of the mouth.
This well balanced and solid design helps to lift and stabilize the shoulders.
The bar diameter is large and coated in copper which softens the control. This
port will apply a slight amount of palate pressure and tongue relief leading to
a better headset and more lift when the mouthpiece rotates . 1-3/4" Port height.
(REP 809) - $ 81.70
(Normally ships in 10-14 days)
|
Larger Image |
X-Series Cavalry Shank
Sweet
Iron Large Chain Mouth
8" Cheeks 5" Mouth
This is a traditional shank redone to better suit the modern
day performance horse. The heaviness of the shank is a good choice for horses
that like to feel the bit. The special no pinch ball design is a great new
feature. The tighter the curb strap the better the leveraqe this bit has. This
is a universal mouthpiece because of the adjustability. It is versatile because
it can be used by any rider on any level horse. It offers great control for
speed events and creates a horse that is more willing to flex giving the rider
better feel. The tighter it is in the horse's mouth and the tightness of the
curb strap determines this bit's severity.
(REP 810) - $ 65.20
(Normally ships in 10-14 days)
|
Larger Image |
X-Series Cavalry Shank
Medium Port Chain Mouth
8"Cheek 5" Mouth
This stainless steel shank gives the traditional cavalry style
a bold new look. The heavier shank is great for horses that like to feel the
bit. When the curb strap is tightened, this shank provides good leverage. This
unique ball design prevents pinching on the corners of the mouth. This medium
port design adds slight palate pressure and lots of tongue relief to cue the
horse to stop. Works well on horses with a good mouth and natural rate. 1-3/4"
Port Height.
(REP 811) - $ 71.20
(Normally ships in 10-14 days)
|
Larger Image |
X-Series Cavalry Shank
Stainless Steel Pinchless Swivel Correction
8" Cheek 5" Mouth
This is a classic style shank redone to fit the needs of the
modern day performance horse. The heaviness of the shank is a good choice for
horses that like to feel the bit. Response level is adjusted by how tight the
bit is in the horse's mouth and the tightness of the curb chain. This unique
ball design prevents pinching on the corners of the mouth. The swivel action of
the port will put more pressure on the bars and will have forward relief. This
is a very well balanced and versatile bit that can be used for any western
discipline throughout the horse's career. It will provide the leverage and
stability needed for scoring, shoulder and stop response. 1-3/4" Port Height.
(REP 812) - $ 99.54
(Normally ships in 10-14 days)
|
Larger Image |
X-Series Cavalry Shank
Medium Twisted Sweet Iron Hinged Port w/Copper Rings
8" Cheek 5" Mouth
This nice stainless steel cavalry shank is not only eye
appealing, but very well balanced. The unique ball design will prevent pinching
on the corners of the mouth found in most traditional bits. The mouthpiece is
designed to get more response out of the horse with less effort from the twist
on the bars and the higher port. It will provide more leverage, control and
stop. The copper adds moisture and softens the mouth while the rings pacify a
nervous horse. 2" Port Height
(REP 813) - $ 82.50
(Normally ships in 10-14 days)
|
Larger Image |
X-Series Cavalrv Shank
Small
Chain with Thumb Port and Copper Roller
8" Cheek 5" Mouth
This is a very good looking, versatile bit with a great new
ball design to prevent pinching. Severity of this bit can be adjusted with the
curb chain and headstall. The thumb port offers a little bit more severity than
a regular spoon snaffle due to the chain on the bars. The Copper roller will
soften the mouth and help to calm the anxious horse. This bit has great
stability for the more mature horse. 2" Port Height
(REP 814) - $ 83.70
(Normally ships in 10-14 days)
|
Larger Image |
X-Series Cavalry Shank
7/16"
Hinge Port
8" Cheek 5" Mouth
This stainless steel cavalry no pinch ball design has a great
new look and feel. It has a little more weight to provide extra leverage and
more whoa. This mouthpiece is effective for a horse that drops its shoul der.
In competition, this bit offers good tongue relief and more stability than a
snaffle while allowing good control. This is a great bit for competition, speed
events, and for everyday riding. 1-1/2" Port Height.
(REP 815) - $ 89.50
(Normally ships in 10-14 days)
|
