Larger Image
|
Buckles
These buckles feature a longer length to accommodate heavier
stap goods. The offset grows in height with each buckle’s size to allow for
various thicknesses in construction. The tongue alignment bar was eliminated and
replaced with small tabs that keep the buckle tongue straight and allow the
leather to lie neatly around the buckle. There is more crown in the shape of
these buckles to help eliminate outer edges catching while helping the buckle
lie neater. Available in 5/8", 3/4" or 1" size. Choose from plain engraved
stainless steel or stainless steel with black accents in the recessed areas of
the engraving.
| |
Plain |
Black Accents |
| 5/8" |
$1.78 each |
$2.20 each |
| 3/4" |
$1.99 each |
$2.41 each |
| 1" |
$2.87 each |
$3.41 each |
(WEA 04000)
|
Larger Image
|
Buckles
These buckles feature a longer length to accommodate heavier
stap goods. The offset grows in height with each buckle’s size to allow for
various thicknesses in construction. The tongue alignment bar was eliminated and
replaced with small tabs that keep the buckle tongue straight and allow the
leather to lie neatly around the buckle. There is more crown in the shape of
these buckles to help eliminate outer edges catching while helping the buckle
lie neater. Available in 5/8", 3/4" or 1" size. Choose from plain engraved
stainless steel or stainless steel with black accents in the recessed areas of
the engraving.
| |
Plain |
Black Accents |
| 5/8" |
$1.79 each |
$2.20 each |
| 3/4" |
$1.99 each |
$2.41 each |
| 1" |
$2.87 each |
$3.41 each |
(WEA 04005)
|
Larger Image
|
Buckles
These buckles feature a longer length to accommodate heavier
stap goods. The offset grows in height with each buckle’s size to allow for
various thicknesses in construction. The tongue alignment bar was eliminated and
replaced with small tabs that keep the buckle tongue straight and allow the
leather to lie neatly around the buckle. There is more crown in the shape of
these buckles to help eliminate outer edges catching while helping the buckle
lie neater. Available in 5/8", 3/4" or 1" size. Choose from plain engraved
stainless steel or stainless steel with black accents in the recessed areas of
the engraving.
| |
Plain |
Black Accents |
| 5/8" |
$1.99 each |
$2.41 each |
| 3/4" |
$2.71 each |
$3.16 each |
| 1" |
$3.37 each |
$3.95 each |
(WEA 04010)
|
Larger Image
|
Center Bar Buckles
These buckles feature a longer length to accommodate heavier
stap goods. The offset grows in height with each buckle’s size to allow for
various thicknesses in construction. The tongue alignment bar was eliminated and
replaced with small tabs that keep the buckle tongue straight and allow the
leather to lie neatly around the buckle. There is more crown in the shape of
these buckles to help eliminate outer edges catching while helping the buckle
lie neater. Available in 5/8", 3/4" or 1" size. Choose from plain engraved
stainless steel or stainless steel with black accents in the recessed areas of
the engraving.
| |
Plain |
Black Accents |
| 5/8" |
$1.90 each |
$2.41 each |
| 3/4" |
$2.59 each |
$3.13 each |
| 1" |
$3.37 each |
$3.95 each |
(WEA 04030)
|
Larger Image
|
Conway Buckles
These conway buckles feature a longer design that allows for
easier adjustment. These conways are the perfect addition to any fine piece of
leatherwork. Designed with more curve so they lie nicer. Available in 5/8", 3/4"
or 1" size. Choose from plain engraved stainless steel or stainless steel with
black accents in the recessed areas of the engraving.
| |
Plain |
Black Accents |
| 5/8" |
$1.66 each |
$2.17 each |
| 3/4" |
$1.99 each |
$2.41 each |
| 1" |
$2.74 each |
$3.16 each |
(WEA 04060)
|
Larger Image
|
Flank Buckles
Beautiful quality flank buckles that suit a wide variety of
needs. These quality flank buckles are perfect choices for more expensive,
handmade saddles. Longer buckle design helps reduce bending the billet while
buckling it and allows it to lie flat when buckled. Features a seamless roller
that helps prevent damage to the back billets. Buckle tongues have a larger
diameter to help stop tear-out during roping. The buckle body has more curve
that ensures that the rear billets lie flatter and exert less pressure on the
buckle tongue. Available in 1-3/4" size. Choose from plain engraved stainless
steel, plain stainless steel or stainless steel with black accents in the
recessed areas of the engraving.
| |
Plain |
Black Accents |
| 1-3/4" |
$5.37 each |
$6.24 each |
(WEA 04070)
|
Larger Image
|
Flank Buckles
Beautiful quality flank buckles that suit a wide variety of
needs. These quality flank buckles are perfect choices for more expensive,
handmade saddles. Longer buckle design helps reduce bending the billet while
buckling it and allows it to lie flat when buckled. Features a seamless roller
that helps prevent damage to the back billets. Buckle tongues have a larger
diameter to help stop tear-out during roping. The buckle body has more curve
that ensures that the rear billets lie flatter and exert less pressure on the
buckle tongue. Available in 1-3/4" size. Choose from plain engraved stainless
steel, plain stainless steel or stainless steel with black accents in the
recessed areas of the engraving.
| |
Plain |
Black Accents |
| 1-3/4" |
$5.37 each |
$6.24 each |
(WEA 04071)
|
Larger Image
|
Flank Buckle - Plain
Beautiful quality flank buckles that suit a wide variety of
needs. These quality flank buckles are perfect choices for more expensive,
handmade saddles. Longer buckle design helps reduce bending the billet while
buckling it and allows it to lie flat when buckled. Features a seamless roller
that helps prevent damage to the back billets. Buckle tongues have a larger
diameter to help stop tear-out during roping. The buckle body has more curve
that ensures that the rear billets lie flatter and exert less pressure on the
buckle tongue. Available in 1-3/4" size. Plain with No Engraving!
| |
Plain with No Engraving |
| 1-3/4" |
$5.16 each |
(WEA 04072)
|
Engraved
Larger Image
Plain - No Engraving
Larger Image
|
Rear Flat Plate Dees
Unique design allows room to sew right up to both sides of the
rivet in the dee - you’ll find this nowhere else! Feature an easy to install
corner. Plenty of room to rivet. The tabs in which the rivets are placed have a
recess for the ear of the saddle seat through which saddle strings are placed.
These dees are the width and depth of old style dees, before the years of shrink
brought on by copies. Available in 2-3/8" size. Sold in pairs. Choose from plain
engraved stainless steel, plain stainless steel or stainless steel with black
accents in the recessed areas of the engraving.
| Plain |
$19.07 pair |
| Black Accents |
$20.82 pair |
| Plain -
No Engraving |
$17.50 pair |
(WEA 04120 - WEA 04122)
|
Larger Image
|
Saddle Collar Dees
Design is ideal for use with martingales that attach high on
the front of the saddle. The offset design is raised up a bit from the surface
of the skirt to help prevent wear on the leading edge of the saddle skirt. The
opening allows more room to slip the tip of the tug strap through, even when
wearing gloves. Feature a full rounded cross section on the front inside
edge to help eliminate the tearing of the tug
straps on the breast collars.
Available in 1". Choose from plain engraved stainless steel or stainless steel
with black accents in the recessed areas of the engraving.
| |
Plain |
Black Accents |
| 1" |
$2.59 each |
$3.04 each |
(WEA 04110)
|
Engraved
Larger Image
No Engraving
Larger Image
|
Front Flat Plates
These plates are exactly the same on both sides of the
centerline so they will fit the right and left side the same. Designed as a
combination of the #777 and #56 plates to get the best of both worlds. The front
slot box is wide enough to allow for easy threading of the latigos. The latigo
slot is full width so there’s no more necking of a latigo during installation.
Designed with plenty of room to sew. Choose from plain engraved stainless steel,
plain stainless steel or stainless steel with black accents in the recessed
areas of the engraving.
| Plain -
Engraved |
$9.53 each |
| Black Accents |
$10.41 each |
| No
Engraving |
$8.75 each |
(WEA 04150 - 04152)
|
Larger Image
|
Deep Saddle Dees
Perfect for ropers, reiners and cutters. Designed with a wide
flange. Offers the wide web with a sense of style. Popular barbed wire design
can be teamed with our matching flank buckles. Available in 2", 2-1/2", 3" or
3-1/2" size. Choose from plain engraved stainless steel or stainless steel with
black accents in the recessed areas of the engraving.
| |
Plain |
Black Accents |
| 2" |
$3.50 each |
$4.37 each |
| 2-1/2" |
$5.44 each |
$6.66 each |
| 3" |
$8.66 each |
$9.99 each |
| 3-1/2" |
$9.53 each |
$10.62 each |
(WEA 04101)
|
Larger Image
|
Saddle Dees
Retro-style dee is reminiscent of those seen on saddles made
in the 1950s and 1960s. This classic dee features floral accents and a full
round bar on the top of the dee to help eliminate tear-out. Offering more
refinement and style, these dees are not as deep or as wide as some of the more
recent choices for roping saddles. Available in 1", 1-1/2", 2", 2-1/2" or 3"
size. Choose from plain engraved stainless steel or stainless steel with black
accents in the recessed areas of the engraving.
| |
Plain |
Black Accents |
| 1" |
$1.75 each |
$2.29 each |
| 1-1/2" |
$2.25 each |
$2.83 each |
| 2" |
$3.72 each |
$4.58 each |
| 2-1/2" |
$6.23 each |
$7.50 each |
| 3" |
$7.15 each |
$8.12 each |
(WEA 04125)
|
Larger Image
|
Martingale Centers
The angles of the slots or bars are the most consistent matches to the
shoulder angle on most horses. All the slots have been made wider so that
when the leather is put in place, it can float or move freely. The bars over
which the leather is placed are totally round so that the leather does not
wear prematurely. Considerable weight has been removed without sacrificing
the strength. Measures 1-3/8" x 1-1/8". Choose from plain engraved stainless
steel or stainless steel with black accents in the recessed areas of the
engraving.
| |
Plain |
Black Accents |
| 1-3/8" x 1-1/8" |
$5.96 each |
$7.08 each |
(WEA 04180)
|
Larger Image
|
Breast Collar Rings
Feature a bar with a larger diameter to help prevent tear-out.
The offset of the bar alleviates some of the pressure that a skirt edge bears.
Has an open shape that allows a person to put the tug strap in the ring with
ease, even when wearing gloves. Features a full rounded cross section on the
front inside edge to help eliminate the tearing of the tug straps on breast
collars. Available in 2" or 2-3/4" size. Choose from plain engraved stainless
steel or stainless steel with black accents in the recessed areas of the
engraving.
| |
Plain |
Black Accents |
| 2" |
$4.72 each |
$5.61 each |
| 2-3/4" |
$5.16 each |
$5.49 each |
(WEA 04185)
|
Larger Image
|
Cathedral Concho with Tie Loops
Beautiful engraving adds a touch of class to this stainless
steel conchos. Tie loops measure 1/2" W x 5/32" H. Use #10 SS scews to fasten.
Available in 1-1/2" or 1-3/4" size.
| 1-1/2" |
1-3/4" |
| $2.85 |
$3.27 |
(WEA 04215)
|
Larger Image
|
Star Concho with Tie Loops
Beautiful engraving adds a touch of class to this stainless
steel conchos. Tie loops measure 1/2" W x 5/32" H. Use #10 SS scews to fasten.
Available in 1-1/2" or 1-3/4" size.
| 1-1/2" |
1-3/4" |
| $2.85 |
$3.27 |
(WEA 04216)
|
Larger Image
|
Circle Concho with Tie Loops
Beautiful engraving adds a touch of class to this stainless
steel conchos. Tie loops measure 1/2" W x 5/32" H. Use #10 SS scews to fasten.
Available in 1-1/2" or 1-3/4" size.
| 1-1/2" |
1-3/4" |
| $2.85 |
$3.27 |
(WEA 04217)
|
Larger Image
|
Floral Conchos with Slots
Very easy to install! The slots have no sharp edges. Conchos
with slots feature 1/8" x 7/16" slots. Available in 1-1/2" or 1-3/4" size.
Choose from plain engraved stainless steel or stainless steel with black accents
in the recessed areas of the engraving.
|
Plain |
Black Accents |
| 1-1/2" |
$2.10 each |
$2.29 each |
| 1-3/4" |
$2.18 each |
$2.71 each |
(WEA 04200)
|
Larger Image
|
Floral Conchos with Loops
Very easy to install! Conchos with loops feature 7/16" x 3/4"
loops. Available in 1-1/2" or 1-3/4" size. Choose from plain engraved
stainless steel or stainless steel with black accents in the recessed areas of
the engraving.
| |
Plain |
Black Accents |
| 1-1/2" |
$2.52 each |
$3.13 each |
| 1-3/4" |
$2.90 each |
$3.53 each |
(WEA 04205)
|
Larger Image
|
Floral Conchos with Posts
Very easy to install! Conchos with posts feature 3/8" long
posts. Available in 1", 1-1/2" or 1-3/4" size. Choose from plain engraved
stainless steel or stainless steel with black accents in the recessed areas of
the engraving.
| |
Plain |
Black Accents |
| 1" |
$1.78 each |
$2.29 each |
| 1-1/2" |
$2.55 each |
$3.23 each |
| 1-3/4" |
$2.88 each |
$3.58 each |
(WEA 04210)
|
